Subject: | Re: BDE setting for NAS
| Date: | Sat, 10 Jun 2023 12:22:54 +1000
| From: | Leslie <"ViaThe List"@NOSPAM.com>
| Newsgroups: | pnews.paradox-development
|
Also make sure you are NOT USING WD Red Drives. If you MUST use WD (I
don't recommend them at all) then use WD Red PRO.
But really you should be using Seagate Barracuda Pro minimum. Seagate
also have Enterprise drives as well.
Again FWIW
On 9/06/2023 12:12 PM, Leslie wrote:
> As Tom implied, the speed of the drives in a NAS does impact
> performance. I have seen setups with 5400RPM drives, which isnt the best
>
> FWIW
>
> On 8/06/2023 8:55 PM, Fabio Spaggiari wrote:
>> Thank you very much for your valuable advice.
>> My network is made up of some PCs with win7 and only one with win10. I'm
>> doing these tests in order to switch to win10 with all PCs.
>> Now I did a test, I placed both data and application on the NAS, and each
>> PC has its own copy of paradox installed. In my opinion the
>> performance has
>> improved but I would like your opinion on the configuration I am using.
>> So if I understood correctly I would have a marked improvement in
>> performance
>> using a server with win server on board.
>> What kind of PC hardware do you recommend?
>> Sorry for my bad English , Thanks Fabio
>>
>
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
|