Subject: | Re: BDE setting for NAS
| Date: | Sat, 10 Jun 2023 13:24:31 +1000
| From: | Leslie <"ViaThe List"@NOSPAM.com>
| Newsgroups: | pnews.paradox-development
|
I meant Seagate Ironwolf Pro not the basic Barracuda drive
On 10/06/2023 12:22 PM, Leslie wrote:
> Also make sure you are NOT USING WD Red Drives. If you MUST use WD (I
> don't recommend them at all) then use WD Red PRO.
>
> But really you should be using Seagate Barracuda Pro minimum. Seagate
> also have Enterprise drives as well.
>
> Again FWIW
>
> On 9/06/2023 12:12 PM, Leslie wrote:
>> As Tom implied, the speed of the drives in a NAS does impact
>> performance. I have seen setups with 5400RPM drives, which isnt the best
>>
>> FWIW
>>
>> On 8/06/2023 8:55 PM, Fabio Spaggiari wrote:
>>> Thank you very much for your valuable advice.
>>> My network is made up of some PCs with win7 and only one with win10. I'm
>>> doing these tests in order to switch to win10 with all PCs.
>>> Now I did a test, I placed both data and application on the NAS, and
>>> each
>>> PC has its own copy of paradox installed. In my opinion the
>>> performance has
>>> improved but I would like your opinion on the configuration I am using.
>>> So if I understood correctly I would have a marked improvement in
>>> performance
>>> using a server with win server on board.
>>> What kind of PC hardware do you recommend?
>>> Sorry for my bad English , Thanks Fabio
>>>
>>
>
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
|